Royal Children Four Wheel Bicycle for 10 Years Old Child with Toolbox BY
BY1611-331 Instruction Manual (I)Pedal Assembling First check the letters at the top of the pedals. "R" stands for RIGHT, "L" LEFT. Then with sheet spanner, assemble the "R" pedal in the right elbow rod. And assemble the "L" pedal in the left elbow rod....Send InquiryChat Now
First check the letters at the top of the pedals. "R" stands for RIGHT, "L" LEFT.
Then with sheet spanner, assemble the "R" pedal in the right elbow rod.
And assemble the "L" pedal in the left elbow rod.
Loosen the screw under the saddle, adjust the saddle to the satisfactory height and direction and make the forewheel, saddle and rearwheel at the same straight line.
1、12", 14" and 16" child bicycles mustn't be used as means of transportation, they are just toy bicycles or for bodily exercise. While 18" and 20" bicycles can be used as means of transportation if you keep the rule that the local safety department issued. But you should dismantle the protective wheels before your children go out for riding in the street.
2、For safety sake, choose the proper model for your children according to their ages, and you'd better be at their hands while they are riding.
12" bicycles for 4 - to - 6 - year - old children.
14" bicycles for 5 - to - 7 - year - oId children.
16" bicycles for 6 - to - 8 - year - old children.
3、Using the bicycle in the proper way, and keep any danger ont of the door for your children's safety sake.
IV. Usage and Maintenance
1、Adjust the height of the saddle and handlebar according to your child's height and note that the length of the pipe in the tube should not be less than 5cm.
2、Check thoroughly after using the bicycle for about one week, and tighten all the screws in order to make the bicycle work properly.
3、All the rolling parts should always be in great lubricating condition so that you can prolong the bicycle's lifetime. Generally, dismantle and assemble the bicycle once about half a year and lubricate the rolling parts.
4、Adjust the brakes. When the need- adjusting space is a little bit big, loosen the screw under the brakefork. Drag or lossen the steel wire to the proper space, then tighten the screw. When the need- adjusting space is just small, loosen the screw on the brakefork, adjust the screwnail to the proper space and then tighten the screw.
Before using our products parents should read the instruction manual in every detail and particular.
This manual is suit for five series of our products (12", 14", 16"), including BMX child bicycle.
(I) General diagram of the bicycle
(II) Components Assembling
Loosen the screw at the middle of the handlebar and put the handlebar pole into the front tube of the bicycle frame. Adjust the length of the pipe in the tube (5cm at the least); Adjust the handlebar to make it perpendicular to the direction that the bicycle will be going. Tighten the bowllike screw and the screw at the middle of the handlebar till the handlebar cannot move in the frontfork(the force moment should not be less than 18 N.m).
Protective Wheels Assembling
Desparately, dismantle the plastic cases, screws restrictive thin pieces. And in proper order, assemble the protective wheels, restrictive thin pieces, screws. Be sure to make the restrictive thin pieces right at the place. And tighten the screws. (The force moment should not be less than 30 N. m)
Put the pipe under the saddle into the holdfast on the bicycle frame, adjust the length (the length should not be less than 5 cm). Adjust the saddle to make it face the right direction, tighten the screw. (the force moment should not be less than 18 N.m).
Put the forewheel in the forefork. Be sure to let the angle of the safety gasket clutch the hole in the forefork, and at the same time the axle of the forewheel should be in the safety gasket. Adjust the space between the wheel and the legs of the fork. And tighten the screws (the force moment should not be less than 18 N.m).
V. Using Notices
If there is the battery, please pay atlention to the following.
1、Open the battery's cover when assembled the battery, then insert the battery withthe correct polarity, locked the battery's cover.
2、Can not charge with another style batteries.
3、Charger with adult's wardship
4、Can not use another style batteries or new and old batteries confusedly.
5、Insert the batteries with the correct polarity.
6、Pull out the spent batteries.
7、Do not let short circle happen.
1. Children bicycles mustn't be used as means of tr ansportation, they are just toy bicycles or for bodily exercise,
2. For safty purpose, please choose the size which is suitable for your child, and use the bicycle always with adults nurse
Name of part
one for each side
certificate of quality